Because whole system is built around HTD-5 timing belt (High Torque Drive with 5 mm pitch) I had to find right timing belt pulley. But here’s the issue. Belt is metric so pully is metric to, however gear motors that I could find have shaft of 5/16? which doesn’t fit any HTD pulley I could find. Fortunately a company in Long Island, NY makes metric pulleys with imperial cores! And they sell timing belts too!

Another problem I encounter was with belt clamps. Very few companies sell HTD clamps, and the price they charge for them is astronomical. $60-90 per clamp, which is nothing but a small aluminum plate with ridges. It probably took me a week to find a company in New Jersey that makes these for just under $8! Not all parts were off shelf. Motor mount was made from old power supply cover which was made out of thick aluminum. Tension rollers were taken out of DLT tape drive but you can also find similar rollers inside VCR.

Click Glide.com | Read the Full Article

The rig is available for purchase on Cinevate’s site.

Check out her whole review on OliviaTech.com

VIA: emmagination

More information here.

Take a board, wrap and staple some felt around it (fleece will also do). Screw some boards to the bottom to raise it up a bit (so the picture frame doesn’t bump the tripod head), affix the wood to your camera plate.

Take a plastic picture frame, cut off the wrap around part (the part that holds the picture in – you want just a single piece), throw a bean bag on top – this will hold your camera and you can change orientation easily.

The viral music video for the recorded version of “This Too Shall Pass” off of the album “Of the Blue Colour of the Sky” was recently remixed in Dolby 5.1 Surround as part of an upcoming CES announcement from Dolby.

SoundWorks Collection talks with band members Tim Nordwind and Damian Kulash about their recent collaboration with John Loose, Sr. Manager, Production of Dolby and album producer Dave Fridmann.

About the Music Video:
The video was filmed in a two story warehouse, in the Echo Park neighborhood of Los Angeles, CA. The “machine” was designed and built by the band, along with members of Syyn Labs over the course of several months.

Directed by James Frost, OK Go and Syyn Labs. Produced by Shirley Moyers. There is also a behind-the-scenes video you should check out below.

VIA: Michael Coleman

$20 DIY PVC SnorriCam

A SnorriCam (also chestcam, bodymount camera, bodycam or bodymount) is a camera device that is rigged to the body of the actor, facing the actor directly, so when he walks, he does not appear to move, but everything around him does. A SnorriCam presents a dynamic point of view from the actor’s perspective, providing an unusual sense of vertigo for the viewer.

Here is a simple SnorriCam using PVC tubes.

VIA: Tom Preska

DIY PVC Dolly

This is an simple track dolly using 40mm PVC tubes and some wheels taken from a pair of Rollerblades. You’ll also need a few pieces of hardware to attach it, like screws.

VIA: Knut Uppstad

DIY Automated DSLR Timelapse Slider

If you want an automated slider/timelapse rig, but don’t want to pay the cost, here is a DIY one you can build yourself.

VIA: Greg Royar

DSLR DIY Pocket Dolly

This is a version of a diy pocket dolly, driven by an adjustable 12V gear motor. The power comes from 8 AA rechargeable batteries, which are integrated into the controller. The dolly is pretty light and compact so that it fits in a backpack and can travel well.

VIA: Ben

DIY Cable Cam

This video tutorial shows you how build a do it yourself (DIY) Cable Cam using parts from the local hardware store.

VIA: Auston Shadow Wilson

Super Easy DIY Camera Motion

There’s a lot of DIY camera motion systems out there involving either roller skates wheels or elaborate balancing rigs, but this easy technique (although it is limited to certain uses) beats them all in terms of it’s sheer simplicity.

VIA: brusspup

DIY Lego Follow Focus

Here is a DIY Follow Focus made with LEGOS. It is variable in size so it fit to various lenses. It’s very small and stable. The second video is a 3D rendered tutorial on how to build this LEGO follow focus.

VIA: havok2

DIY $14 Camera Slide

This DIY Camera Slide was put together with very common and inexpensive parts, as a bit of an experiment in frugality.

VIA: Darren Levine

DIY Mechanical Crank Driven Camera Slider

Sliders have caught on in popularity recently with the lightweight DSLR camera explosion. Some say that the effect is overused – perhaps it is, but in my mind adding some slight subtle camera movements to your shot adds a tremendous amount of production value. And when it comes to subtle movement, sliders deliver the most bang for the buck, both in terms of cost and ease of setup and use.

Read the full article here.

Build a DIY Fig Rig

Have you ever wanted to have a sweet steady cam rig, but don’t want to spend up to $300? This video teaches you how to build a crazy cheap Fig Rig!

VIA: indymogul

DIY Tripod Steadicam

This video will show you a technique for converting a tripod to a “steadicam”, or MerriCam using only a screwdriver. The Sunpak Platinum Plus 7500 Pro tripod was used for this video, along with the Canon HV20. This technique is not meant for very large or heavy cameras, but is ideal for consumer-sized camcorders like the HV20.

VIA: SundogPictures

Cheap DIY Follow Focus

Here’s a simple way to make yourself a kind of follow focus. Not perfect but works really well for rack focus.

VIA: André Desrochers

DIY Timelapse Skateboard Dolly

The skateboard is pulled by a motor which you can buy at electronic supply stores all around the world. The Camera is controlled by a selfmade interval-o-meter with Arduino. You can find the set-up here: openmoco.org/node/88.

VIA: Pascal Schneider

$25 DIY Spider Trax Dolly

This is a video describes how you can build a cool little do it yourself “Spider Trax Dolly” for only $25.

VIA: Just Basl Productions

DIY DSLR Wooden Shoulder Rig

A wooden shoulder rig for a DSLR videographer. Two handlebars, one can change the focus.

For more info please go here:
athan.se/diy-shoulder-rig/

Sample video: vimeo.com/11535111

Build a DIY Slider for $20

In this video DIY tutorial BFX shows you how to make a super effective and compact camera slider! This awesome filmmaking tool attaches to the top of any tripod and lets you get super smooth professional looking shots!

VIA: indymogul

DIY DSLR Camera Jib for Under $200

This video tutorial demonstrates how to build a Do it Yourself (DIY) DSLR Camera Jib for under $200.

VIA: FilmRiot

DIY ZazaSlider

The DIY ZazaSlider allows you to add dolly and slider shots to your cinematography in a highly portable and efficient way and you can save you hundreds by building it yourself.

For more info on making a ZaZaSlider, go here:
ZaZaSlider.com

$13 DIY Camera Dolly

Learn how to get camera dolly shots for under $13.

VIA: matttchapman

DIY Camera Motion Control

Here is a cool little do it yourself motion control system.

“The system consists of a ready-made IGUS DryLin W rail system and a small stepping motor which is controlled by an Arduino interface board. Once the controller program is loaded the system works stand alone. It can be powered by a battery and can be controlled by a simple power switch because the programmed task starts automatically each time the Arduino board is powered on. It’s possible to move loads (camera + mounting head) of up to 6 kg (3 lbs).”

You can find a detailed description of this project along with instructions and build list: HERE

An example video can be found: HERE

VIA: Martin Koch

Evil Dead Shaky Cam Effect

This video tutorial pays homage to the Evil Dead series by showing you how to recreate the ‘Shaky-Cam’ effect made popular by the cult-classic horror film.

VIA: indymogul

DIY Snorricam Tutorial

This video shows you how to build a cheap DIY Snorricam for all your filmmaking needs. Darren Aronofsky and Martin Scorsese have famously used the Snorricam in their films and now you can, too.

VIA: indymogul